UTStarcom GPRS798 User Manual page 94

Pairing/Connecting the headset
� � � Note : With some phone models, the headset is connected
automatically after pairing with the headset. After the headset is
connected to the phone, the indicator light flashes blue every five
seconds (however, this is phone dependent).
� � � Note : It's better to try to pair your headset with the phone
close-by.
� � � Note : Once you have paired your headset with the phone,
you don't need to pair it again until you want to use it with another
phone.
� � � Note : When in pairing mode, if the headset is not paired with
a mobile phone for 3 minutes, the headset will be turned off
automatically.
185
When you want to use it with another phone
When you want to use your headset with another phone that isn't the
phone that you paired your headset with, you need to pair it again.
- Press and hold either the Volume-up
button and Power/Talk
Then, the headset's blue light is on and your headset is now ready for
pairing.
Press & hold for 2 sec
- Prepare your phone according to the phone's user manual on pairing.
- Continue according to the instructions in the phone's user manual.
- The default passkey of the headset is [0000].
- When pairing has been completed, the headset indicator light flashes
blue every 3 seconds.
186 186
button or Volume-down
button together for 2 seconds.