Pairing/Connecting The Headset; Turning The Headset On/Off; Paring The Headset With A Phone - UTStarcom GPRS798 User Manual

Pairing/Connecting the headset

1. Turning the headset ON/OFF

To turn the headset on:
- Press and hold the Power/Talk
- The indicator goes on in blue and you will hear a do-remi tone.
- The headset is now turned on.
Press & hold for 5 sec
� � � Note : [PAIRING MODE] When the headset is turned on for the
first time, it will automatically be ready for pairing: When this happens,
the blue light is on.
183
button for 5 seconds.
� � � Note : [CONNECTABLE MODE] Once your headset has a
history of pairing with your phone, and the headset is turned on, the
indicator will flash blue every 3 seconds.
To turn the headset off:
- Press and hold the Power/Talk
- You will hear a mi-re-do tone after a key detect tone and the indicator
blink in red for 1 second.
- The headset is now turned off.
� � � Note : If you release the button immediately after the key
detect tone, the headset will act differently for some operations, such
as answer the 2nd call, reject call or voice dialing. To turn the headset
off, be sure to hear mi-re-do tone or check the red LED blink.
2. Pairing the headset with a phone
When you use the headset for the first time
You will need to pair the headset with the phone that you intend to use
it with.
- If the headset is turned on for the first time, it will automatically be
ready for pairing. In this case, the headset indicator's blue light is on.
- Prepare your phone according to the phone's user manual on pairing.
- Continue following the instructions in the phone's user manual.
- You can search headset by the name of 'BHE30'.
- The default passkey of the headset is [0000].
- When pairing has been completed, the headset indicator light flashes
blue every 3 seconds.
184 184
button for 5 seconds.