Pcsync; Connect; Connect Screen; Window Version For Ums - UTStarcom GPRS798 User Manual

PCSync

Connect

When you connect USB cable to the phone, this menu
is popup to select DATA or UMS.
1
Using or key, select UMS or DATA and press the
key or the key.
●DATA : PCSync, GPRS modem.
●UMS : USB Mass Storage.
2
When you select data, the phone is changed to Standby
mode and you can use it as PCsync or GPRS modem.
(Please refer to PCsync manual about PCsync connection and
how to use GPRS modem.)
3
When you select UMS, the appropriate Application is
activated immediately.
4
If you don't want PCSync, press the
to cancel and go back to the previous screen.
153
soft
soft key or key

Connect Screen

Please refer to PCSync manual about how to use PCSync and
GPRS modem.
� � � Notes :
●The status of phone network while using UMS and PCSync function
is shown to be busy and Alarm or message isn't shown.
●If you reuse PCSync after finishing, remove USB cable from the phone
and connect again.

Window version for UMS

When you use UMS, the appropriate window version
is as below.
●Win98SE
●WinME
●Win2000 SP4 (SP1, 2, 3 not available)
●WinXP SP2 (SP 1 not available)
154