Camcorder(Menu 6-2) - UTStarcom GPRS798 User Manual

Camera
Camcorder
In this menu, you can take a video and save it.
6. Camera
The following options are available by pressing
1 Camera
2 Camcorder the soft key. Camcorder menu options are
3 Photo Album
the same as Camera options excluding
4 Video Album
5 Configuration
Timer/Flash/Multishot.
- Zoom : Use the or to adjust the zoom from 1 to 4 level.
But this functions is available before start taking a video.
- Effect : Use the or to select various effects to the image.
- Quality : Use the or to adjust the quality of the image
among good, normal and fine.
- White Balance : Use the
among Auto, Sunlight, Cloudy, Incandescent and Fluorescent.
- Exposure : Use the or
-3~+3 level.
- ISO : Use the or key to adjust the ISO
( level: auto, 100, 200 ).
- Contrast : Use the or
from 1 to 5 level.
- Saturation : Use the or
from 1 to 9 level.
- Sharpness : Use the or
from 1 to 4 level.
111
Menu 6-2
or to adjust the White Balance
key to adjust the contrast from
key to adjust the Contrast
key to adjust the Saturation
key to adjust the Sharpness
- Measure Method : Use the
Measure Method , Spot/Center/Mean level.
- Light Frequency : Use the
Light Frequency from 60 to 50Hz.
- Night Mode : Use the
On/Off.
You may not be able to take video if there's insufficient
� � � Note :
memory.
Sub LCD Function using Camcorder
1
Mode setting is available only from the main LCD. After
setting, press the to revert to the Sub LCD. If you want
to change the setting, go to the main LCD and set the mode.
2
After changing to the sub-LCD, record a video by pressing
the Side down key, or by pressing and holding the
Navigation Key
3
While recording, you can pause and resume recording by
pressing the Side down key. Pressing the Side up key stops
recording and automatically saves the video.
4
After the screen changes to sub LCD, key functions are the
same as on the main LCD.
112
or key to adjust the
or key to adjust the
or key to adjust the mode to