Overview
Heater
Caution!
may be hot
Network connector - RJ-45 Ethernet connector. Supports High Power over Ethernet (IEE 802.3at). Use Axis T8124 Midspan
(included). Shielded cable shall be used to comply with EMC.
Control button - The control button is used for
•
Connecting to AXIS Internet Dynamic DNS Service, see page 32. To connect, press the button once.
•
Restoring the camera to factory default settings, see
Network connector
Status indicator LED
Resetting to the Factory Default Settings,
5
AXIS Q6032-E - Product Description
Part number (P/N) & Serial number (S/N).
The serial number may be required
during the installation.
Power button
(for Factory Default only)
SDHC memory card slot
Control button
on page 38.