Table of Contents
Advertisement
Assembly
6. Install the Console to the Frame Assembly
NOTICE: Route the Data Cable (7a) through the opening (3a) to the connector (1a) on the Console before you slide the Console onto
the mount plate. If necessary, carefully pull more cable slack out of the Handlebar Post.
Make sure the wide tab (1b) on the Console engages the mount plate (3b). Carefully pull up on the Console to make sure it is
secure.
Do not cut or pinch the cable. If necessary to keep the cable out of the way, use Hook and Loop Strap (D) to secure it to the
Handlebar tube. Be sure to allow enough slack for Handlebar adjustments.
1
1a
18
Owner's Manual
1
1b
1a
7a
3b
3a
D
Advertisement
Table of Contents
