Advertisement
Supplying Power
Battery Refresh Feature
This feature completely discharges the Battery before recharging begins.
To maintain your battery's operating capacity, use the refresh feature after about every five charges.
CHARGE Lamp
I Plug in AC Adaptor.
2 Place the Battery into the
SS
AC Adaptor.
NS
Io
Press the BATTERY REFRESH
button.
The CHARGE Lamp will flash when
discharging begins and stop flashing
when fully discharged. POWER Lamp
will stay lit when fully charged.
4 Remove the Battery
* Should you accidentally press the BATTERY
REFRESH button, remove Battery and then
re-insert it to begin charging.
* It takes about five hours when both Battery
Refresh and charging are performed.
ONLY FOR U.S.A.
ATTENTION:
The product that you have purchased is powered by a rechargeable battery. The battery
is recyclable. At the end of its useful life, under various state and local laws, it may be
illegal to dispose of this battery into the municipal waste stream. Check with your local
solid waste officials for details in your area for recycling options or proper disposal.
Battery Care
Caution:
To avoid damage to the Battery:
* Charge only with specified charger.
* Do not drop or jar the Battery.
« The Battery can be charged within a tempera-
* Use the Battery with specified units only.
ture range of 32° F (0° C) and 104° F (40? C).
* If the Battery is used in extremely high
* The Battery may be warm after charging or
temperatures, a safety device will automati-
just after use. This is normal.
cally prevent operation.
* Do not use an insufficiently charged or worn
out Battery.
To insure longer battery life:
,
;
* While not in use, remove Battery from the
=e f Fed Miss diss or diapose ot ih
Patmcorder and AC Adaptor and store ina
fire
9
Y
'
P
cool, dark, dry place. |
+ Do not directly connect (short circuit) the
* Keep the Battery terminals clean.
positive (+) and negative (-) terminals.
* Never attempt to disassemble or reassemble
the Battery.
8
Advertisement
