Advertisement
Setting the Clock
Setting the clock is divided into three sections; Set the Time Zone, Set the Daylight
G)
Saving Time, and Set the Date and Time. Please follow instructions in the order
o
presented.
Before you begin...
S
Set the Time Zone
+ Connect the Palmcorder to a power source.
ra)
The Palmcorder is set to the Eastern
* Set the POWER switch to VCR or CAMERA.
T,
Standard time zone at the factory. If you
Note:
y
live in a different time zone, follow the
CLOCK SET menu disappears if, after
A
steps below to change it. Then, when
activation, CLOCK SET UP A, DOWN ¥ or
(0
traveling, rather than resetting the clock to | DISPLAY buttons are not pressed within 30
Q.
the local time, you can simply set the
seconds.
appropriate time zone.
The Palmcorder's clock may lose or gain up
to two minutes per month. Please adjust as
necessary (refer to page 13).
1 Press CLOCK SET UP A to display
the CLOCK SET menu.
Press UP A or DOWN Y repeatedly
|
to select]
38
MILAN
from
the CLOCK SET menu.
Press DISPLAY to display the
SELECT TIME ZONE menu.
Press UP A or DOWN
Y repeatedly
to select one of the eight time zones of
the location where you are using the
Palmcorder.
5 Press DISPLAY to fix the Time Zone.
The CLOCK SET menu appears.
To exit from the CLOCK SET
menu, select ESNY] and press
DISPLAY.
Note:
When you travel outside the eight time
zones right, please set the clock
; 000:
9:00 :10:00:11:00:12:00:
1:00
: 2:00
manually
(see page
13).
11
Advertisement
