Advertisement
Camera Recording
Before you begin...
* Connect the Palmcorder to a power source.
* Insert a cassette with record tab (see page 10).
Simple Recording
1 Set the POWER switch to CAMERA.
Built-In Lens Cover opens.
EVF
PAUSE
Record/Pause
mode.
2 With the Viewfinder Eye Cup up to
your eye, adjust the Vision Adjust-
ment Control to your eyesight.
0
t
2.
o
O A
D
um 1
c
E
o
3
E Slide the TAPE SPEED Selector
to SP or SLP (refer to page 10).
Zo
RECORD/PAUSE to start
recording.
The Tally Lamp and RECORD/PAUSE
are lit during recording.
Note:
* Do not leave the Palmcorder with the EVF
aimed directly at the sun as this may cause
RECORD
damage to the internal parts of the EVF.
Press RECORD/PAUSE again to
pause recording.
Set the POWER switch to OFF after
recording is finished.
* To remove the cassette
in Record/Pause mode, slide the TAPE EJECT
Switch (refer to page 10).
* When your Palmcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is a norma!
characteristic of the CCD pick-up device. Try
to avoid this when possible.
19
Advertisement
