Download Print this page

Panasonic Palmcorder IQ PV-A396 Operating Instructions Manual page 35

Hide thumbs Also See for Palmcorder IQ PV-A396:

Advertisement

Before Requesting Service
if you have a problem with your Palmcorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
[Symptom
— — — —
|
Correction
No picture in the EVF ...
* Make sure a Power Source is connected. (pp. 7, 9)
* Make sure the POWER switch is set to VCR or
CAMERA. (pp. 19, 24)
* Check the Dew Indicator. (p. 17)
.* Make sure the battery is fully charged. (p. 7)
* Make sure all necessary cables are connected
correctly
and firmly. (p. 26)
Video cassette can't be inserted ...
* Make sure a Power Source is connected. (pp. 7, 9)
. o
cassette with the window side facing out.
p.
Video cassette can't be removed
* Make sure a Power Source is connected. (pp. 7, 9)
No operation starts when operation buttons | * Check the Dew Indicator. (p. 17)
are pressed ...
Recording cannot be done
* Make sure the record tab is still intact. (p. 10)
* Check the Battery Indicator. (p. 15)
Auto Focus does not operate
* Make sure the FOCUS button is set to AUTO. (p. 28)
* Make sure the unit is ON, with the POWER
switch set to CAMERA (p. 19).
* Check the Dew Indicator. (p. 17)
Sound from microphone can't be monitored ...|
« Make sure the unit is set to REC
or Record/Pause mode.
Camera picture is too dark
* Make sure the HIGH SPEED SHUTTER button is
OFF (p. 29).
No playback picture, or the playback
* Press the Clock Set UP A/DOWN Y button
picture is noisy or contains streaks
during playback (Tracking Control) (p. 24).
During playback, the picture shows motion | + Portions of the still picture where the normal
or blurred action ...
speed motion was particularly rapid may produce
this effect. This is normal.
"Panasonic Palmcorder iQ IT'S VHS! SO
| * Set the POWER switch to OFF and then CAMERA.
ITS TAPES PLAY IN YOUR VCR"
appears in the EVF and Monitor ...
If the top of your playback picture waves
back and forth excessively ...
* Because the playback signal is not as stable as
an off the air TV signal, the top of your TV screen
may be bent or unstable when the tape is played
back. This symptom is more noticeable when a
tape, recorded on another VCR, is played back.
To solve this problem, locate the horizontal hold
control on your TV. Turn it slowly to correct the
wavy picture. If your TV does not have a
horizontal hold control or adjusting the control
does not help, some modifications may have to
be made to the TV set. Technically this is called
"Horizontal AFC time constant change." If such a
problem exists, please contact your local TV
service center. (Some nomina! service charges
may be required.)
35
uon
INO
404

Advertisement

loading