Advertisement
Supplying Power
Charge the Battery Pack
Charge the Battery Pack fully
before operation.
G)
D
=
=
To)
o
Land
D
>
D
o
CUR
1 Plug in the AC Adaptor.
CHARGE
;
Lamp
POWER Lamp lights up.
insert the Battery
® Align the right side of the Battery with
the line on the AC Adaptor.
(8) Press down on the Battery and then
slide it in the direction of the arrow.
CHARGE Lamp lights up. It goes out
when charging is done (about one hour).
3 Remove the Battery
Slide the Battery out and then tift up.
Battery Charging
Confirmation Marker
* The useful operation time of the Battery will
gradually decrease after repeated use and
recharging. The Battery is no longer serviceable
if the operation time is very short, even after a
Use this marker as a reminder to yourself
sufficient charge.
when the battery is fully charged or in
Note:
need of a charge. This marker performs
After recharging the Battery Pack about 5 times,
no function and is for your reference only.|
use the BATTERY REFRESH feature as
explained on page 8.
Use the Battery Pack
With a fully charged Battery Pack, you will have a maximum of about one hour of
continuous use.
1 Attach the Battery
® Align the Battery with the top of the
mounting surface.
® Press it into place until it locks with a
click.
2 Remove the Battery
While sliding the BATTERY RELEASE
button, remove the Battery.
7
Advertisement
