1.1.1 Air flow (Fig. 1.6)
Air drawn through filter (AF) and open inlet valve (IV) into
compressor element (E) is compressed. Compressed air and
oil flow into air receiver/oil separator (AR) via check valve
(CV). The air is discharged through outlet valve (AV) via
minimum pressure valve (Vp), air cooler (Ca) and condensate
trap (MTa).
4
Fig. 1.2 General view of GA90C
AV
Air outlet valve
CM
Control module
Daa
Automatic condensate drain outlet
Dma
Manual condensate drain valve
1
Electric cable entry
Figs. 1.1 and 1.2 General views of GA75 and GA90C
Check valve (CV) prevents blow-back of compressed air when
the compressor is stopped. Minimum pressure valve (Vp)
prevents the receiver pressure from dropping below a minimum
pressure.
CM
Instruction book
AV
1
Dma
Daa
2920 1381 02