Classic Exhibits visionary DESIGNS MOD-1109 Setup Instructions

© 2018
Order #XXXXX
Steps:
1) Assemble back panel by connecting verticals [1] and [4] with horizontals [5] and [5A].
2) Assemble front panel by connecting verticals [2] and [3] to curved horizontals [6] and [6A],
placing infill between, making sure Velcro faces inside counter.
3) Connect front and back panels together with horizontals [7] and [7A],
placing infill between.
4) Attach shelf supports to Velcro inside infills, then place shelf on top.
5) Connect door to vertical [3]. See Door Connection
6) Slide counter top over verticals [2] and [3]. See
7) Attach plex counter to verticals [2] and [3], using screw caps.
8) Attach literature holders to vertical [2]. See
9) Connect puck light cord to power.
Extrusions [3] [4] [7] and
[7A] stay assembled for
packing.
7A 4
*
Infill
Door
6A
3
Shelf
*
Infill
7 5
2
6
MOD-1109 Counter
detail.
Counter Top Lock detail.
Literature Holder Attachment detail.
*
Door Connection
Door
Slide pin into
Hinge
hinge attached
to vertical.
Pin
Slide door
hinge over pin.
Hinge
5A
Extrusions [1] [2] [7] and
7A
[7A] stay assembled for
packing.
Infill
1
Shelf
Support
7
Item Qty. Description
1 1 38" RSG560 Vertical Extrusion w/ Door Stop
2 1 42" RSG530 Vertical Extrusion
3 1 42" RSG530 Vertical Extrusion
4 1 38" RSG560 Vertical Extrusion w/ S44
5,5A 1,1 41.5" Z45 Curved Horizontal Extrusion
6,6A 1,1 41.5" Z45 Curved Horizontal Extrusion
7,7A 2,2 16" Z45 Horizontal Extrusion
Screw
Cap
Screw
Cap
Plex Counter
Counter Top
Puck Light
*
Literature
*
Holder
*
*
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com
Completed Assembly
*
Counter Top Lock
1 2
Hole
Pin
Align hole with pin Rotate pin. Spring
will push pin into hole.
*
Literature Holder Attachment
Literature
Holder
Connector
2
Locks
Attach angled end of connector to
literature holder. Attach flat end of
connector to vertical [2]. Tighten
locks to secure.