Classic Exhibits visionary DESIGNS MOD-1180 Manual

Order #XXXXX - MOD-1180 - Workstation Assembly
Modul Extrusion: Part List
Item Qty. Description
1 1 Base Plate
2 2 Right Leg Extrusion
3 2 Left Leg Extrusion
4 1 Vertical Extrusion for Monitor Mount Attachment
EURO LT System: Part List
Item Qty. Description
1 1 Tapered Panel w/ Door
2 1 Side Panel
3 1 Tapered Panel
4 1 Side Panel
Steps:
1) Attach left leg extrusions [3] to panel [2] and right leg
extrusions [2] to panel [4] using supplied screws,
see detail illustration below.
2) Assemble panels [1 and 3] to panels
[2 and 3] as shown.
Step 1
Screws
Step 2
1
2
Screws
3
3
w w w . c l a s s i c e x h i b i t s . c o m
Steps (Cont'd):
3) Attach leg assemblies to base plate [1]
using bolts as shown.
4) Attach pins to back of panels
then set floor atop pins.
5) Velcro shelf supports to inside of
assembled base, then set shelf atop
supports.
6) Attach plate to underside of counter, and
secure with provided screws.
7) Attach vertical extrusion [4] to counter
using supplied bolt.
8) Set counter atop assembled
base.
9) Attach monitor mount to vertical extrusion
where indicated, see monitor mount
attachment detail.
3
Floor
Step 4
Attach pins to lower BACK
side of panels [1 and 3]
for floor placement.
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
*
Monitor Mount Attachment
Attach monitor mount to vertical
extrusions after assembly.
[1 and 3],
Slide Mount
into Groove of
Vertical Extrusion.
Step 1
Screws
2
4
Screws
3
2
2
Tighten
Attach top
Setscrew
Plate and
tighten screws
Counter Top
Step 3
Shelf Supports
Step 5
4
3
2
2
1
866.652.2100
*
4
Step 7
Step 6
Shelf
© 2011