Call Waiting; Placing A Call On Hold - Uniden TRU 8860 Series Owner's Manual

Call Waiting

note
•You must subscribe
through your local
telephone company to
receive Call Waiting or
Caller ID on call

Placing a Call on Hold

waiting service.
•While a call is on hold,
CIDCW can not be
received.
[ 3 3 ] B A S I C S
If you have Call Waiting service and a call waiting
tone sounds while you are on a call, press talk/flash
on the handset to accept the waiting call. There is a
short pause, and then you will hear the new caller. To
return to the original caller, press talk/flash again.
You can place a call on hold for 5 minutes. When 5 minutes has passed, the call is
disconnected, and the phone returns to standby mode.
1) During a call, press intcom/hold. The call will be put
on hold.
If you leave a call on hold for more than 10 seconds, the
display screen will read,
2) To talk to the caller, press talk/flash or speaker on a handset. The phone will
return back to the call.
.
H o ld
w w w . u n i d e n . c o m