Multi-Handset Features; Using Directlink Mode - Uniden TRU 8860 Series Owner's Manual

Multi-Handset Features

note
Handsets can be in
Direct Link mode while
other handsets are in

Using DirectLink Mode

use.
[ 5 3 ] M U L T I - H A N D S E T F E A T U R E S
The features in this section require a minimum of
two handsets to operate. To add additional
handsets to your system, see "Expanding Your
Phone" on page 14.
To use this feature, you must enter the handsets into DirectLink mode first.
To enter DirectLink mode, see page 18.
DirectLink call
1) When the phone is in the DirectLink standby mode,
press the DirectLink soft key (example of DirectLink
from handset #1).
2) Select the handset to which you wish to DirectLink
with by pressing the number keys (0-9). Your handset
will then page the other handset.
3) On the receiving handset, press talk/flash, the
ANSWER soft key, or if Any Key Answer is on, press any
number key, /tone/
*
4) When you finish your conversation, press end or the
END soft key on either handset. Return the handset to the cradle, or press the
CANCEL soft key and then the OK soft key to return to normal standby mode
(cancelling DirectLink mode).
< >
, or #/ .
w w w . u n i d e n . c o m