Using The Flash Button; Using The Redial Button; Storing A Number In Memory - Uniden EXP91 Operating Manual

Using the Flash Button

F
Use to send a timed hook-flash for accessing services such as
call waiting, etc.
F
Press the

Using the Redial Button

R
The button dials the last number that you called.
R
Press
Note: If any other key is pressed before
redial the last number.

Storing a Number in Memory

To store a number in memory:
1. Remove the Handset from the Base Unit and press
2. The talk LED flashes and you hear a beep.
3. Enter the number you want to store (up to 16 digits).
Note: You have 20 seconds after pressing
number you wish to store. Otherwise, an error tone will
sound.
M
4. Press
5. Enter a number (0-9) for the memory location you wish to use.
Note: If you select any key other than 0-9, the Handset will beep
rapidly and no number is stored.
6. You hear a long beep and the talk LED goes out indicating the
number has been stored successfully.
7. Write the stored number and its memory location number on
one of the enclosed stickers.
button on the Handset during your conversation.
. The last number called is dialed again.
.
R
, the phone will not
M
17
M
.
to enter the