Troubleshooting; Range; Radio Interference - Uniden EXP91 Operating Manual

If your EXP91 Cordless Telephone is not performing to your
expectations, please try these simple steps. If you are still
unable to resolve the problems, contact your place of purchase.
Note: Do not attempt to service this unit yourself. All service must
be done by qualified service personnel.
Problem
Base Unit Power light does not
come on.
Charge light won't come on when
Handset is placed in Base Unit.
Conversation interrupted
frequently.
Handset doesn't ring.

Range

The EXP91 is designed to achieve the maximum possible range
by transmitting and receiving according to the highest
specifications set forth by the FCC. We have rated this phone to
operate at a maximum distance with the qualification that the
range depends upon the environment in which the telephone is
used. Many factors limit range, and it would be impossible to
include all the variables in our rating. The Maximum Range
rating of the EXP91 is meant to be used as a means of
comparison against other range claims.

Radio Interference

Radio interference may occasionally cause interruptions in your
conversations. When this happens, remember that your unit is
not defective. If these noises continue and are too distracting,
move to a different location while you are talking on the phone
or change channels on your cordless handset.

Troubleshooting

Make sure the AC Adapter is plugged into the
Base Unit and wall outlet.
Make sure the AC Adapter is plugged into the
Base Unit and wall outlet.
Make sure the Handset is properly seated in the
Base Unit.
Make sure the Rechargeable Battery Pack is
properly placed in the Handset.
Make sure that the charging contacts on the
Handset and on the Base Unit are clean.
Make sure that the Base Unit antenna is fully
vertical.
Move closer to the Base Unit.
Change Channels.
Rechargeable Battery may be weak or not
charged fully. Charge the Battery Pack for 4-5
hours.
Make sure the Base Unit antenna is fully vertical.
The Handset may be too far away from the
Base Unit.
Check the AC supply.
20
Suggestion