Installing The Battery Pack - Uniden EXP91 Operating Manual

Installing the Battery Pack

Note: The built-in Memory Backup feature allows up to 3 minutes
after disconnecting the old Battery Pack to install a new
one without losing any phone numbers that may be
stored in the telephone's memory.
To install or replace the rechargeable battery in your phone,
follow these steps:
1. Remove the Handset battery
cover.
2. Plug the battery's cable into the
Handset.
Note: The plastic connectors
will fit together only one way. If
you have difficulty, make sure
the battery's connector is
properly aligned.
3. Replace the battery cover.
14