Using Your Answering System - Uniden EXAI4248i Owner's Manual

Using Your Answering System

The message counter displays the number of messages stored in memory. If the display
flashes, new messages are waiting for you. The flashing number represents the number of new
messages, not total messages. The cordless phone plays the new messages first; after all the
new messages are played, you can play the old messages.
When the answering system is full, [
announces "No remaining time." You should delete some messages so that the system can
record new messages. (Refer to "Deleting a Message" on page 43.)
Playing Your Messages
1) With the phone in standby mode, press the
(play/stop) key. The system announces the
number of new and old messages. The LED
displays the number of new messages, and the
number flashes. The day and time that each
message was received is announced after the
message is played.
2) When all new messages have been played, you
hear a confirmation tone and an
announcement "End of messages." The
message counter displays the total number of
stored messages, and the system returns to
standby.
w w w . u n i d e n . c o m
] is displayed on the base, and the system
U S I N G Y O U R A N S W E R I N G S Y S T E M [ 4 0 ]
hint
To stop playing your
messages, press the
(play/stop) key again at
any time.