Accessing The Answering System; Recording Your Personal Greeting - Uniden D2997 User Manual

Menu Option
Message Alert
Ans. Language
Call Screen
Ans. On/Off

Accessing the Answering System

Withthephoneinstandby,youcan
accessyoursystem
fromthebaseor
remotelyfromany
handset.
  Only1handsetor
thebasecanaccess
thesystematatime.
  Duringremoteaccess:
 - Thesystembeepssoyou
knowit'swaitingforyournextcommand.
 - Youcanpressthenumberkeyshownnexttoeachcommandinsteadof
scrollingthroughthescreens.
 - Ifyoudonothingfor30seconds,thephonereturnstostandby.

Recording Your Personal Greeting

Yourpersonaloutgoingmessageorgreetingcanbebetween2secondsand30
secondslong.Ifyoudon'twanttorecordagreeting,thesystemusesthepre-
recordedgreeting:Hello, no one is available to take your call. Please leave a message
after the tone.
From the base
1. Press and hold gReeT until the system
says "Record greeting" (about two
seconds).
2. Wait until the system beeps, then
begin speaking.
3. Press gReeT to stop recording. The
system plays back your new greeting.
4. To keep this greeting, do nothing.
To re-record it, go back to step 1.
What it does
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Change the language of the system's voice prompts.
Turn on the call screen feature so you can hear callers as they
leave messages on the base speaker (see p. 16).
Turn your answering system on or off. (To turn your system
on or off from the base, just press on/oFF .)
1:Repeat
2:Play
Use
PHONEBOOK
the previous option.
Press
remote operation mode.
3:Skip
5:Stop
4:Delete
[ / /select]
to go to
Press
SELECT/MENU
choose the current option.
From a handset
1. Access the answering system. Wait until
the system finishes its announcements,
or press 5 (number key) to skip them.
2. Press 8 . Wait until the system says
"Record greeting" before speaking.
3. Press 5 to stop recording. The system
plays back your new greeting.
4. To keep this greeting, press FlaSh/exiT .
To re-record it, go back to step 2.
to start
MUTE/MESSAGES
6:SelectGreeting
8:RecNewGreeting
Use to go to
CID
the next option.
to
Press
FLASH/EXIT
remote operation mode.
to stop
English - 15