Personalizing The Greeting; Accessing The Answering System - Uniden DECT 2145 Series Owner's Manual

personalizing the greeting

Your personal outgoing message or greeting can be from 2 to 30 seconds
long. If you don't record a greeting, the system uses a pre-recorded
greeting: Hello, no one is available to take your call. Please leave a
message after the tone.
To...
Record a personal
greeting
Switch between
greetings
Delete your
greeting

accessing the answering system

When the phone's in
standby, you can access the
system from any handset:
• Only 1 handset can access
the system at a time.
• If you do nothing for 30
seconds, the phone returns
to standby.
• You can press the number
key shown next to each
command instead of
scrolling through the
screens.
Follow these steps:
1. Open the menu with the phone in standby. Select
Answering Setup, then Record Greeting.
2. Press menu/seleCt to start recording. Wait
until the system says "Record greeting" before
speaking.
3. Press menu/seleCtto stop recording. The
system plays back your new greeting.
4. To keep the greeting, press end. To re-record it,
press menu/seleCt.
5. Open the menu with the phone in standby. Select
Answering Setup, then Greeting Options.
6. The system plays back the current greeting.
Press menu/seleCt to switch greetings.
Switch to your personal greeting, press IntCom/
Clear then "Delete Greeting?" is displayed. Select
"Yes" to clear greeting.
Use PHONEBOOK
go back to the
previous option:
3:Skip
2:Play
1:Repeat
Pr Press
MESSAGE/MUTE
remo remote operation mode.
to
4:Delete
[ / /select]
to start
Use CID to go to
the next option:
5:Stop
Press MENU/SELECT
to choose the
current option
OR
END to exit remote
operation mode.
23