Accessing The Answering System - Uniden D1789 series User Manual

Personalizing the Greeting
Your personal outgoing message or greeting can be from 2 to 30 seconds long. If you don't record
a greeting, the system uses a pre-recorded greeting: Hello, no one is available to take your call.
Please leave a message after the tone.
to... follow these steps:
1. Open the menu with the phone in standby. Select
then
2. Press
start recording. Wait until the system says "Record greeting" before
speaking.
record a
3. Press
personal
recording. The system plays back your new greeting.
greeting
4. To keep the greeting, press
handset. To delete it and try again, press
intercOM/clear
#
1. Open the menu with the phone in standby. Select
then
switch
between
2. The system plays back the current greeting. Press
greetings
base or
prerecorded greeting and the personal greeting.
delete your Switch to your personal greeting, then press
greeting
intercOM/clear

aCCessinG the answeRinG sYstem

When the phone's in standby, you can access the answering
system from any handset; however, only 1 station can access
the answering system at a time.
• After 30 seconds of inactivity, it returns to standby.
• During remote access, the phone beeps so you know it's
waiting for the next command.
• During message playback, press
menu for playback control. You can press the number key
shown next to each command instead of scrolling through the screens.
to... from the base
Press
play new
The system announces the date, time, and the number of new and
messages
old messages before playing each new message in the order it was
received. After the new messages play, the system plays the old
messages.
Record Greeting.
on the base or
select
on the base or
select
on the handset.
Recording a greeting overwrites any previously recorded
greetings.
Greeting Options.
on the cordless handset to switch between the
Menu/select
on the handset.
Menu/select
Play/stOP.
on the cordless handset to
Menu/select
on the cordless handset to stop
Menu/select
on the base or
Play/stOP
clear/flasH
clear/flasH
to open the
from a handset
Press
select
Answering Setup,
on the
enD
on the base or
Answering Setup,
on the
select
on the base or
Press MESSAGE/MUTE to start
remote operation mode.
1:Repeat 3:Skip
4:Delete 5:Stop
Press a correspond-
ing number key to
choose an operation
END to exit remote
operation mode.
and
Message/Mute
Play Message.
English - 21
OR