Resetting A Handset; Registering A Handset - Uniden D2997 User Manual

D2997 series
Hide thumbs Also See for D2997:
Table of Contents

Advertisement

Liquid Damage
CAUTION: If the base is covered in liquid, disconnect the adapter and
phone cord from the wall before touching it.
Iftheliquidisonlyontheexteriorhousingofthebaseorhandset,wipeitoff
anduseasnormal.Ifyoucanhearliquidinsidethehousing:
1. Disconnectallcablesandcordsandremoveallcompartmentcovers.
2. Ifliquidisleakingfromanyventorhole,turnthephonesothatventfaces
down.Ifnot,placethelargestventfacedown.
3. Letdryforatleast3days.Checkforliquidinsidethephonebeforereplacing
compartmentcoversandreconnectingcords.

Resetting a Handset

Ifyouhavetroublewithahandsetorifyouwanttoreplaceone,resetit:
1. Pressandhold FlaSh/exiT and pound (#)
displays(about5seconds).
2.
Ifyoustillhavethebasethehandsetisregisteredto,selectDeregister
selectthehandsetyouwanttoreset.Ifyoudon'thavethatbaseanymore,
selectBase
Unavailable.
3.
Toconfirm,selectYes.ThehandsetdisplaysHandset not

Registering a Handset

Ifyouseea"notregistered"messageonahandset,youmustregisterittoa
basebeforeusingit.
1.
Placethehandsetinthebase;thedisplayshouldsayHandset
2.
WaituntilthehandsetdisplaysaysRegistration
thenpickupthehandsetandpress Talk/end .
#
If you don't hear a dial tone or the display says
the battery completely, then try again.
Adapter and Battery Information
AC adapter
Base
Part number PS-0034
Input
120V AC, 60 Hz
voltage
Output
7.8V AC
voltage
@ 450mA
  UseonlythesuppliedACadapters.
  Usetheproperadapterforthebaseandanychargers.
  Donotplacetheunitindirectsunlightorsubjectittohightemperatures.
20 - English
Charger
Battery pack (with normal use)
PS-0035
Part number
/ Capacity
Talk time
Standby time about 7 days
8V AC
@ 300mA
Battery life
atthesametimeuntilSystem
Complete(about30seconds),
Registration
BT-1016 / 500mAh, 2.4V DC
or
BT-1025 / 400mAh, 2.4V DC
about 10 hours
about 1 year
Reset
HS,then
registered.
Registering.
Failed, charge

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D2997-2D2997-3D2997-4D2997-6D2997-5

Table of Contents