Table of Contents
Advertisement
DESCRIPTION
THE SUB COMPACT
®
A
THE SUB COMPACT
B
Cooling chamber
C
Door
D
Door handle
E
TORP detector
F
Tap handle
G
Upper part of the dispensing
head
H
Tap
Technical Characteristics
Voltage rating
See plate under appliance
Power rating
See plate under appliance
Insulation class
II
Cooling class
N
Dimensions (l x h x d)
452.5x190x383.3 (open door and no drip tray)
in mm
Weight
4.45 kg
Power cord length
0.9 m
80% relative humidity
Operating conditions
min: 12 °C, max: 28 °C
Pressure switch in air circuit
Safety mechanisms
Thermal protection
Electrical protection (fuses)
The manufacturer reserves the right to make modifications to the
appliance. Machine compliant with European Directive 89/336/EEC
(Legislative decree 476 of 04/12/1992) on electromagnetic compatibility.
10
I
Drip tray
J
Temperature indicator
K
Power cable
THE TORP
®
L
THE TORP
M
Cap
N
Tube
O
Connector
P
Tube spout
1 – PREPARING THE SUB COMPACT
Installation
THE SUB COMPACT should be used indoors at a room temperature of
between 12°C and 28°C.
The original packaging has been designed to protect the appliance. We
recommend that you keep it for future transport.
Take THE SUB COMPACT out of its packaging, along with the drip tray
and the tap handle, and place them on a flat, dry surface that is clean
and large enough (1-2).
Do not install THE SUB COMPACT near heat sources or in places that are
directly exposed to sunlight.
Install the drip tray to the front of the appliance.
Plug THE SUB COMPACT into an appropriate socket (3). Check that the
red temperature indicator lights up.
Tip: We recommend connecting THE SUB COMPACT to the power
supply at least one hour before installing a TORP.
Temperature Indicator
Red: THE SUB COMPACT is connected to the power supply. The cooling
process is in progress.
Green: the beer is at optimum temperature and ready to serve.
Please note: when the indicator light turns green, the appliance may not
have reached its optimal temperature.
Noise
THE SUB COMPACT is fitted with a cooling system that regulates the
temperature of THE TORP. It is usual for this technology to generate
some sound, particularly during the cooling phase.
THE SUB COMPACT is also fitted with a pump to keep THE TORP under
pressure. During use, the pump will start up automatically, generating a
sound that will stop after a few seconds.
EN
11
Advertisement
Table of Contents
