Table of Contents
Advertisement
5.2 Maintenance and Inspection
For lubrication of the pump, perform oiling once every 10 days
with lubricating oil.
Supply the lubricating oil as following.
1)
Remove the air regulator.
2)
Inject a few drops of lubricating oil (approx. 0.5 mL) into the
air supply port as shown in the figure at right. Use turbine
oil class 1 ISO (VG-32) or equivalent as the lubricating oil.
5.3 Consumable Parts
The parts used in the packing and slide portion of the pump will
be worn away. They must be checked and replaced once a year.
See the separate Maintenance Manual.
7
Advertisement
Table of Contents
