TEKNIX TKED64INDB Instruction Manual page 17

Using your Freestanding Cooker
Programmable Timer
Clock setting
Set the time before you start using the oven.
When connecting the appliance to the electrical
power supply for the first time or after a mains
power failure, the "
Press the "+" or "-" button to set the time. After
approximately five seconds the indicator light will
stop flashing and the display will show the set time.
To change the time subsequently, press the function
selection button "
starts flashing, then press the "+" or "-" button to set
the correct time.
Manual cooking procedure (without using the
cooking programmer)
To switch on and use the oven in manual mode
(disabling the cooking programmer), simply set the
cooking mode selection knob to the required
position and then set the temperature on the
thermostat knob.
top position "0".
Timer cooking procedure
-Cooking time setting
1A - Set the cooking duration (max 10 hours). Press
the function selection button "
the " " symbol starts flashing, then press the "+"
or "-" button to set the cooking duration;
" symbol will flash.
" until the " " symbol
" repeatedly until
2A - Having no further settings in a few seconds,
the " " symbol will stop flashing and turn
always lighted, immediately cooking is started.
When cooking is ended the oven will
will flash and the alarm will sound. To mute
the alarm press any key; after one minute the
- Cooking end time setting
1B - Set the cooking end time (current clock
time + up 10:00 max). Press the function
selection button "
the " " symbol starts flashing, then press
the "+" or "-" button to set the cooking end time.
2B - Having no further settings in a few seconds,
the " " symbol will stop flashing and turn
always lighted, immediately cooking is started.
When the set time is reached the oven will
will flash and the alarm will sound. To mute
the alarm press any key; after one minute the
17
" repeatedly until