Safety; Representation Conventions; Safety Instructions (Warning Notes); Classification Of Hazards - Optimum OPTIgrind GH 10T Operating Manual

Drill bit grinder
Hide thumbs Also See for OPTIgrind GH 10T:
Table of Contents

Advertisement

1

Safety

1.1

Representation Conventions

gives additional advices
calls on you to act
enumerations
This part of the operating instructions
explains the meaning and use of the warning notices included in these operating instructions,
defines the intended use of the drill bit grinder,
points out the dangers that might arise for you or others if these instructions are not observed,
informs you about how to avoid dangers.
In addition to these operation instructions, please observe
the applicable laws and regulations,
the legal regulations for accident prevention.
When installing, operating, maintaining and repairing the drill bit grinder it is necessary to
observe the European standards
The still applicable country-specific regulations need to be applied for the not yet for the
corresponding national country law implemented German standards.
If required it is necessary to take the corresponding measures to comply with the country-
specific regulations before commissioning the drill bit grinder.
Please keep this documentation always close to the drill bit grinder.
INFORMATION
If you are unable to solve a problem using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D- 96103 Hallstadt
email: info@optimum-maschinen.de
1.2

Safety instructions (warning notes)

1.2.1

Classification of hazards

We classify the safety instructions into different levels. The table below gives an overview of the
classification of symbols (pictograms) and signal words for the specific danger and its (possible)
consequences.
Pictogram
Signal word
DANGER!
WARNING!
CAUTION!
ATTENTION!
EN
GH 10T | GH 15T
4
Definition/Consequences
Imminent danger that will cause severe injury of death to the staff.
A danger that might cause severe injury to the staff or can lead to death.
Danger of unsafe procedure that might cause injury to the staff or property
damages.
Situation that could cause damage to the machine and products and other
types of damage.
No risk of injury to the staff.
Originalbetriebsanleitung
Safety
Version 1.1.4 - 2022-09-23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPTIgrind GH 10T and is the answer not in the manual?

This manual is also suitable for:

Optigrind gh 15t310 0110310 0115

Table of Contents