Page 1
Service Manual_2018-V1.0 Service Manual CHEST FREEZER SERIES Applicable Models Model Code CE-BD240- FT 22032010003061 CE-BD249- FT 22032010003221 Prepared by R&D:liuwx5 QA:WuXinbin Reviewed by SVC:Zhang Kun R&D:ZhangHuawei Approved by SVC:GuangTaoshuai (The picture in this service manual is only for reference, and specific appearance and configuration are subject to the real product)
Page 2
Manufacturers or distributors are not responsible for the content of the Manual and interpretation thereof. Midea Refrigerators Technical Maintenance Manual Copyright @2017 All rights reserved. Replication of all or part of the Manual in any forms shall not be allowed without written approval by the Overseas Sales Corporation of Midea Refrigerators.
Service Manual_2018-V1.0 Contents 1. Safety Warning Code ............................5 1.1 Warning for operation safety ........................5 1.2 Safety instruction for refrigerant ....................... 7 2. Description for product features ......................... 8 3. Installation and commissioning .......................... 9 3.1 Handling ............................... 9 3.2 Door Disassembly and Assembly ......................
Page 4
Service Manual_2018-V1.0 10. Circuit description ............................. 31 10.1 Power Supply(None) ..........................31 10.2 Test circuit for door switch(None) ......................31 10.3 Temperature test circuit(None) ......................31 10.4 Freezer chamber fan motor circuit (None) ..................31 10.5 refrigerating chamber fan motor circuit (None) .................. 31 10.6 Condensation fan circuit (None) ......................
Service Manual_2018-V1.0 1. Safety Warning Code 1.1 Warning for operation safety Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your freezer. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your freezer.
Page 6
Service Manual_2018-V1.0 CONNECTING ELECTRICITY Electrical Shock Hazard. Failure to follow these instructions can Plug into a grounded 3-prong outlet. result in death, fire, or electrical shock. Do not remove the ground prong. Do not use an adapter. WARNING Electric Shock Hazard Failure to follow these instructions can result in electric shock, fire, or death.
Service Manual_2018-V1.0 13) Do not store or use gasoline or any flammable liquids inside or in the vicinity of this freezer. 14) Do not use extension cords or ungrounded (two-prong) adapters with this freezer. If the power cord is too short, have a qualified electrician install an outlet near the freezer. Use of an extension cord can negatively affect the freezer’s performance.
Service Manual_2018-V1.0 2. Description for product features This product is provided with following features: 1) Square shaped temperature control panel, two or three indicator light...
Service Manual_2018-V1.0 3. Installation and commissioning 3.1 Handling Handling 1)Protect the refrigerator in moving it,Same as shown as left photo, please move it by handcart with cushion 2)Remove all packing materials and bottom cushion, the n move into house for placement 3)After moving it to appropriate location, wait for 2 hours before power on.
Service Manual_2018-V1.0 3.4 Leveling of the refrigerator Leveling of the refrigerator If the refrigerator cannot be placed steadily, adjust the footing to level it. 3.5 Door reversal Door reversal Door reversal None 3.6 Installation of handle Installation of handle 1- Handle 2- M5*14 screw(two) 3- Screw hole cover (two) 1) The handle is inserted below the display control board...
Service Manual_2018-V1.0 3.7 Installation of door lock Installation of door lock Installation of door lock With the door handle together 3.8 Adjustment to level the door Adjustment to level the door Adjustment to level the door None 3.9 Adjustment to shelves Adjustment to shelves Adjustment to shelves None...
Service Manual_2018-V1.0 5.3 Inside temperature Temperature tolerance ≤ 2 The highest ( Lowest ( Compartment Freezing Refrigerating None None Variable temperature None None 5.4 Defrosting parts Item Initial defrosting period Normal defrosting period Defrosting period None None Defrosting sensor None None Defrosting temperature None...
Service Manual_2018-V1.0 6. Internal view and dimension 6.1 Main parts and their names Freezer chamber Freezer chamber ❶ Door shell ❼ Levelling feet ❷ The door end cover ❽ Compressor mounting panel ❸ Door gasket ❾ Temperature-control panel ❹ Door liner ❿...
Service Manual_2018-V1.0 7. Refrigerating piping system and circulating route of cooling air 7.1 Refrigerating piping system ❶Compressor→❷Right condenser→❸Left Condenser→❹Dry filter→❺Capillary tube→❻Evaporator 7.2 Circulating route of cooling air...
Service Manual_2018-V1.0 8. Dismantling of parts 8.1 Parts on the door Door seal 1)Pull the door seal from the corner 2)Take efforts until door seal totally detaches from door inner liner groove, remove the door seal 3)Fixing the four corners and pressing smoothly. The hinge cover 1)Push the hinge cover from the bottom to the top and appear displacement for the hinge cover.
Service Manual_2018-V1.0 2)Pull down hinge cover from the bottom. 3)Slap forcefully the top hinge cover with the palm, and wear safety gloves for fear of cutting the hand. After the displacement, pull down the hinge cover. Door light disassembly and assembly None Door light disassembly and assembly 8.2 Parts inside the refrigerator...
Service Manual_2018-V1.0 Counterclockwise to remove the pipe cover Ice tray Ice tray None 8.3 Light system Light Light None Light switch Light switch None Indicator lamp Indicator lamp POWER 8.4 Evaporator and temperature sensing system Freezer sensor Freezer sensor None Ambient temperature sensor Ambient temperature sensor None...
Page 22
Service Manual_2018-V1.0 Pull down the screw, open the shutter. Compressor and the cooling system pipe 1)Cut off the compressor pipeline.-❶Cut off the process pipeline.-❷Cut off the low-pressure muffler.-❸Cut off the high-pressure exhaust pipe. 2-1)Remove the screws(for some models) -Two screws outside -One screw inside 2-2)Remove the metal clamp(for some models) -Disassembly the metal clamp that is fix the electric...
Page 23
Service Manual_2018-V1.0 4-1)Remove the screws(for some models) -Two screws outside -One screw inside 4-2)Remove the metal clamp(for some models) -Disassembly the metal clamp that is fix the electric appliance shield 5)Remove the starter and protector Unplug the starter and protector (you can use a screwdriver to pry it slowly) 6)Loosen the screw of the compressor bottom plate, remove the floor together with the compressor from the...
Page 24
Service Manual_2018-V1.0 7)Use the wrench to remove the bolts by steps❹❺❻❼, replace the compressor and reverse process can complete installation. 8)Use Pipe cutter cut off the condenser tube❽, then Shear off capillary ❾ by the capillary tube scissors. 9)Replace the compressorand welding the compressor pipeline.-❿Welding the process pipeline.-⓫Welding the low-pressure muffler.-⓬Welding the high-pressure exhaust pipe.
Page 25
Service Manual_2018-V1.0 11)Vacuum system,The degree of vacuum below 6Pa. 12)Perfusion refrigerant. 13)Use the vise grip pliers clamp the middle of the process pipe, then seal welding process tube⓯⓰. Piping system in the compressor case ❶ Capacitor ❿ Compressor ❷ -1 Front condenser pipeline-1 ⓫...
Service Manual_2018-V1.0 Condenser fan motor Fan motor None Standby condenser None 8.7 Temperature-control box assembly view Temperature-control box assembly view ❶ screw ❹ Temperature-control panel ❷ Temperature-control box ❺ TEMP. control knob ❸ Thermostat ❻ Indicator light...
Page 27
Service Manual_2018-V1.0 Destuffing 1) Pull down the screw, open the shutter. 2)Take out of temperature control box assembly by pressing shrapnel with the hands. Note:there are four shrapnels separately in the four corners,require enough strength to press shrapnel. Suggest pressing one and pushing toward the corner, as the above one by one.
Page 28
Service Manual_2018-V1.0 4) Remove the control box screw, take out the control box cover 5)Pull out the wiring harness and indicator light 6)Pull out the control knob 7)Pull out the fixed nut of the thermostat 8) remove the indicator light and thermostat, the reverse operation is for assembly...
Service Manual_2018-V1.0 9.4 Defrosting Unplug the freezer and open the freezer door, remove foods and drawers before defrosting; Open the outflow holes and drainage holes(and place water container at the outflow holes); indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost softens, an ice scraper might be used to the accelerate de-icing process.
Service Manual_2018-V1.0 10. Circuit description 10.1 Power Supply(None) 10.2 Test circuit for door switch(None) 10.3 Temperature test circuit(None) 10.4 Freezer chamber fan motor circuit (None) 10.5 refrigerating chamber fan motor circuit (None) 10.6 Condensation fan circuit (None) 10.7 Fan motor circuit of the ventilation door(None) 10.8 Resistance value of the sensor (R/T) (None)
Service Manual_2018-V1.0 13. Appendix 13.1 Refrigerator maintenance tooling and equipment and material Tooling Name Main Usage Photo screw assemble and Phillips screwdriver disassemble slotted screw and rivet assemble and screwdriver/scraper disassemble hinge and compressor screw Socket spanner 5/16″ assemble and disassemble display panel and air duct cover Sucker disassemble...
Page 37
Service Manual_2018-V1.0 Nipper Assistive tooling pliers/diagonal pliers Capillary tube scissors Shear capillary Knife assistive tool Pipe cutter, Flaring Pipe cutting,flaring device Electronic digital Test temperature thermometer Measurement with resistance, Multi meter voltage, current and so on. Equipment Name Main Usage Photo Vacuum pump with vacuum pumping...
Page 38
Service Manual_2018-V1.0 High pressure pipe and cooling nitrogen with system(condenser, evaporator, piezometer etc) impurities clean Connection process pipeline, Quick coupling vacuum or charge refrigerant will be used. Soldering gun heating and welding welding point leakage detect, if hand leak detector no, use soap-suds Material Name...
Page 39
Service Manual_2018-V1.0 Adhesive tape Door fixing for reversing door Aluminium-Aluminium tubes Transition copper pipe welding, maintain lengthen tubes...
Page 40
MIDEA appliances after sales website tsp.midea.com For more information about Midea appliances after sales, please visit the For more information about the service manual, please visit the tsp.midea.com tsp.midea.com For more information about the EV and SBOM, please visit the...