Headlight Bulb Replacement; Turn Signal And Taillight Bulb Replacement - Yamaha BWS 100 1999 Owner's Manual

1. Bulb holder

Headlight bulb replacement

This scooter is equipped with a S1
bulb headlight. If the headlight bulb
burns out, replace it as follows:
1. Remove cowling A. (See page
6-6 for cowling removal and in-
stallation procedures.)
2. Turn the bulb holder counter-
clockwise to remove it and re-
move the defective bulb.
PERIODIC MAINTENANCE AND MINOR REPAIR
w
Keep flammable products and your
hands away from a bulb while it is
1
on, as it is hot. Do not touch a bulb
until it cools down.
3. Put a new bulb into position and
secure it in place with the bulb
holder.
EAUT1528
cC
Avoid touching the glass part of a
bulb. Keep it free from oil; other-
wise, the transparency of the glass,
life of the bulb, and luminous flux
will be adversely affected. If oil gets
on a bulb, thoroughly clean it with
a cloth moistened with alcohol or
lacquer thinner.
4. Install the cowling.
If the headlight beam adjustment is
necessary, ask a Yamaha dealer to
make that adjustment.
EW000119
1. Turn signal bulb
Turn signal and taillight bulb
EC000105
replacement
6-21
1. Remove the screws and the
lense.
2. Push the bulb inward and turn
it counterclockwise.
Front
1
EAU00855