Advertisement
Windows XP (Classic View):
Double-click the Phone and Modem Options icon.
Windows XP (Category View):
and Internet Connections, and then Phone and Modem Options.
Windows 2000:
Click Windows Start, Settings, and then Control Panel.
Double-click the Phone and Modem Options icon.
Click the Modems tab. You should see a description of your new
U.S. Robotics modem and a COM port setting. If you do not see a
description of your modem, see the Note at the end of this section.
Make sure that your new U.S. Robotics modem is selected and click
Properties. Click the Diagnostics tab. Click Query Modem. You should see a
series of commands and responses from the modem. This means that the
installation was successful.
If you do not see commands and responses, shut down and restart your
computer. To determine whether your modem is functioning properly,
repeat the steps above. If your modem is still not working, refer to the
additional troubleshooting steps in this guide.
Windows Me, 98, and 95:
Panel. Double-click the Modems icon. In the Modems Properties screen,
you should see a description for your new U.S. Robotics modem. If you do
not see a description of your modem, see the Note at the end of this section.
Click the Diagnostics tab. Make sure that the correct COM port (modem) is
selected. Click the More Info button. You should see a series of commands
and responses from the modem. This means that the installation was
successful.
If you do not see commands and responses, shut down and restart your
computer. To determine whether your modem is functioning properly,
repeat the steps above. If your modem is still not working, refer to the
additional troubleshooting steps in this guide.
Note:
If your modem is not listed and/or you do not see a series of
commands and responses, refer to the additional troubleshooting steps
of this guide. Shut down and restart your computer. To verify that your
modem is functioning properly, repeat the steps listed for your
operating system.
Click Windows Start and then Control Panel.
Click Windows Start, Control Panel, Network
Click Windows Start, Settings, and then Control
7
Advertisement
