Advertisement
Installation Guide
Package contents
Your U.S. Robotics 56K PC Card Winmodem with XJACK
contains the following items:
•
U.S. Robotics 56K PC Card Winmodem with XJACK Connector
•
RJ-11 phone cord
•
Quick Installation Guide
•
Installation CD-ROM, which contains software and a User Guide for
use with your new modem
What will you need
You will need the following items to install your U.S. Robotics 56K PC Card
Winmodem with XJACK Connector:
•
Notebook computer with an empty PC card slot
•
Analog telephone line
Caution:
The U.S. Robotics 56K PC Card Winmodem with XJACK
Connector requires a standard analog telephone line. Do not connect
your modem to a digital telephone line. Digital lines are commonly used
in office buildings and hotels. If you are unsure whether your line is
analog or digital, ask your network administrator, building
management, or your local telephone company.
Before You Begin: Preparing for installation
Note:
U.S. Robotics recommends uninstalling any other modems that
are installed in your system and unplugging all telephone cords
connected to these modems. Refer to your previous modem's
documentation for instructions.
Write down your new modem's serial number, which is located on the white bar
code sticker on the modem and on the modem's box, in the space below. If you
ever need to call our Technical Support department, you will need the serial
number and the model number to receive assistance. If you need to get
assistance or download drivers from the Web site, you will need the product ID.
Model Number
3056
Product ID
USR3056
®
Connector package
Serial Number
3
Advertisement
