Microcomputer-Based Operations - Marantz SD-63 User Manual

Microcomputer-based operations
- Cassette-tape slack removal mechanism
When a cassette tape is inserted and the cassette compartment
slack.
+ Timer recording/playback
¢ Quick rewind
¢ REC MUTE mechanism
* Next search
playback-resumes from there.
¢ Synchro recording
This feature is only available' when a Marantz CD player incorpo-
rating this feature is combined with this unit.
RECORDING/ PLAYBACK WITH TIMER
For connections for Unattended Timer Recording and Timer
Playback, refer to the instruction manual supplied with the audio
timer. ~
Notes on timer recording/playback
¢ Some audio timers available on the market are turned off
automatically 59 minutes after their power has been turned
on. For details, read the instruction manual supplied with your"
audio timer carefully.
e |fthe POWER switch is switched ON while the TIMER switch
is still set to REC, even though Timer Recording is not
required, the unit will go straight: into the REC mode. To
prevent this, be sure to-set the TIMER switch to OFF when
Timer Recording is not required.
Timer Recording
By attaching an audio timer to this unit, radio broadcasts. can be
recorded while your are absent or sleeping.
1. Set the audio timer to the ON position, and set the TIMER
switch of this unit to OFF (center position).
2. Set the power of your stereo system to ON, and tune the
tuner to the radio station to be recorded.
3. Set the POWER switch to ON, and insert the cassette to be
recorded into the cassette compartment.
Press the REC button to enter the REC PAUSE mode. Then
adjust the recording level by turning the REC LEVEL control
so that the red segments of the level meter light up only at
intervals.
After the level setting, put the unit into the STOP mode.
Set the TIMER switch to REC.
Set the audio timer to the AUTO pools: and set the start
time and stop time.
When the start time set above comes, the power to all
required components will be turned on and recording will
start. When the tape has been wound to the end, the tape
travel will be stopped by the auto shut-off function, then the
power to this unit and the stereo system will be turned off by
the timer.
Timer Playback
1. Set the audio timer to the ON position, and set the TIMER
switch of this unit to OFF (center position).
2. Insert the cassette to be played into the cassette compart-
ment.
3. Set the power of your stereo system to ON, and adjust the
playback level of the tape to be played.
4. Set the TIMER switch to PLAY.
5. Set the audio timer to the AUTO position, and set the start.
time and stop time.
6. When the start time set above comes, the powers to all
required components will be turned on and playback will'
start. When the tape has been wound to the end, the tape
travel will be stopped by the total shut-off function, then the
power to this unit and the stereo system will be turned off by
the timer.