STOP & BUTTON:
Press this button to stop all opération and put the unit into the
stop mode.
~
PLAY > BUTTON:
Press this button to start tape playback The ">" indicator lights
up on the display.
PAUSE 7 BUTTON:
<<. BUTTON:
Press this button to rewind the tape at a high speed. The "<"
indicator lights up on the display.
pr BUTTON:
Press this button to fast-forward the tape. The " »" indicator lights
up on the display.
.
.
@ BUTTON:
O BUTTON:
45) RECORD LEVEL CONTROL
To raise the recording level, turn the knob clockwise.
PHONES JACK
Accepts headphones (optional) utilizing a standard stereo phone
plug.
DOLBY NR SWITCH
Set this switch when therecording or playback is using the Dolby
Noise Reduction system.
PLAYBACK
@ Press the POWER switch to ON.
@® Press the EJECT button to open the cassette compartment.
@® Insert a cassette tape and close the' cassette compartment
@ If the tape fies been recorded using Dolby NR, select the
same Dolby NR setting as was used in recording.
© Press the RESET button to reset the digital tape counter to
"Ogg0".
© Press the PLAY button.
The " &" indicator starts to flash on the display.
RECORDING
@ Press the POWER switch to ON.
@ Press the EJECT button to open the cassette compartment.
© Insert a cassette tape and close the cassette compartment.
@ Select the Dolby NR if necessary.
© Press the RESET button to reset the digital tape counter to
"O000".
'
© Press the REC button.
The unit enters the REC PAUSE mode.
@ Adjust the REC LEVEL control so that the red segments of the
peak level meter light up only at intervals.
Press the PAUSE or PLAY button to start recording.