Advertisement
*Note: You may receive a "Digital Signature Not Found" or "Windows Logo testing"
screen. Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in
conjunction with the supported hardware and has verified compatibility with Windows
2000, Me, and XP. Because U.S. Robotics wants its customers to take full advantage of the net-
work adapter's functionality, it has made the drivers available.
Note: If you are prompted at any time for your Windows Operating System CD-ROM,
remove the U.S. Robotics Installation CD-ROM and insert your Windows CD-ROM into the
CD-ROM drive. When all of the files are copied, remove the Windows CD-ROM, and rein-
sert the U.S. Robotics Installation CD-ROM.
Step Three: Connect the 802.11g 54Mbps USB Adapter to a
Wireless Router
You should now see a small icon for the Configuration Utility
in the system tray by your clock on your computer desktop.
The Configuration Utility is used to change or verify the con-
figuration information that relates to your 802.11g 54Mbps
USB Adapter. The Configuration Utility icon will be colored to indicate the status of your wireless
connection: red for disconnected, yellow for connected with fair quality, and green for connected
with good quality. The 802.11g 54Mbps USB Adapter will automatically connect to an available
Wireless Router. You will need to verify that you are connected to the correct Wireless Router.
Double-click the Configuration Utility icon. When the Configuration Utility launches, you can view
the connection information in the Configuration tab and in the Link Information tab. If you are not
connected to the correct Wireless Router, you can either scan for a Wireless Router to connect to
or enter the information for a specific Wireless Router.
To scan for a Wireless Router, click the Site Survey tab. Locate the Wireless Router you want to
connect to in the list and double-click it. If you do not see the Wireless Router in the list, click
Scan to search for the Wireless Router. The default SSID of the 802.11g 54Mbps Router is
USR5562.
If security is enabled in the Wireless Router you want to connect to or if you want to manually
enter the configuration information, you will need to set up a profile. For information about how
to do this, refer to the Navigating the Wireless Configuration Utility section of the User Guide on
the Installation CD-ROM.
When you have connected to an existing wireless
network, click the Link Information tab. You will see
a picture with a computer and a wireless device. If
you see a graphic representing signal waves
between the computer and the wireless device, you
are connected to the wireless network.
If you cannot connect to the Internet or to the correct Wireless Router, verify your configuration
settings and then refer to the Troubleshooting section in this Guide or in the User Guide on the
Installation CD-ROM.
7
Advertisement
