Advanced - AOC SPT5512S User Manual

7.2.3. Compass
Setup time for compass' auto collapsing: always on or 5,
10, 15 or 20 seconds afterwards.
Setup status of compass after collapsing: folded into a
circle or disappear.
7.2.4. VOL and BRT
Adjust the volume level.
Adjust the backlight brightness manually or
automatically.
7.2.5. Audio output
Set audio output to speaker of the device or S/PDIF.
Note: this function is available only when connected
with S/PDIF device.
7.3.

Advanced

7.3.1. Input source
Setup default channel after powering on:
1. Fixed channel: always enter the channel after
device power on.
2. Memory channel: enter the last channel of last
active session after system power on.
Input access:
1. Auto switch: connect to source of signal and auto
redirect to required channel.
2. Show a popup window: connect to source of signal
and a pop-up dialog box prompted to ask whether
to redirect to the required channel.
Input name: customize channel name; name of the
same channel throughout the system will be changed
accordingly.
Auto wakeup: wake up the device in sleep mode
automatically once it is connected to a source of HDMI
or VGA signal.
7.3.2. HDCP
ON/OFF HDCP
7.3.3. USB permission
Enable USB permission, lock USB port.
20