AOC SPT5512S User Manual page 9

1.4.2. How to use wall mount kit
1. Use the wainscoting as a template to drill
four hole walls with a diameter of 8 mm
to a depth of 50mm. Then wedge four
plastic anchors into the hole.
2. To Install the siding, place the wall nail
board on the wall, and then screw each
plastic with four self-tapping screws to fix
the wall board through the metal washer.
3. Install the bracket rail into the back of
the display, select suitable screws from
screw package according to the size of
the holes in the back of display. Fasten
the two hanging arms onto the back
of display by screwing, and keep the
horizontal balance of the two hanging
arms on both sides.
4. Hang the display with bracket rails
installed on the wall plate until it is formed
hold-off.
5. Fasten the two bolts against the wall
plate then down.
Caution:
To prevent the display from falling:
• For wall or ceiling installation, we
recommend installing the display with
metal brackets which are commercially
available. For detailed installation
instructions, refer to the guide received
with the respective bracket.
• To lessen the probability of injury and
damage resulting from fall of the display
in case of earthquake or other natural
disaster, be sure to consult the bracket
manufacturer for installation location.
3