Recording With A Cassette Deck; Video Recording; Surround Effect And Dolby 3Ch Logic - Pioneer VSX-604S Operating Instructions Manual

RECORDING WITH A CASSETTE DECK
RECORDING WITH VCR/TAPE 1
If the TAPE 2 MONITOR button is ON, press to turn OFF.
1.
1.
Select the source you want to record from with the
input selector buttons.
When recording AM or FM broadcasts, select a preset
station using the multi-jog. If the desired station has not
been preset, tune in the station.
Start recording on the cassette deck.
Play the desired program source (record, compact
disc, etc.)}.
The volume, balance, and tone controls have no effect
on the recording.
VIDEO RECORDING
Select the source you want to record from with the
input selector buttons.
* When recording from a LaserDisc to VCR > LD
Start recording on the VCR.
For VCR, select a line input ( external input ).
{ | RECORDING WITH TAPE 2
1. Select the source you want to record from with the
input selector buttons.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact
disc, etc.).
The volume, balance, and tone controls have no effect
on the recording.
- When copying a tape, play back on the TAPE 1/VCR cassette
deck, and record on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped
with a monitoring function, the recorded sound can be
monitored through the speaker system by pressing the TAPE
2 MONITOR button to ON.
3. Start playback on the component selected with the
input selector.
The volume, balance, and tone controls have no effect
on the recording. |
You can easily perform LD-to-VDR dubbing using GUI. (LD
COPY OPERATION P. 27)
Select the desired mode with the DOLBY PRO-LOGIC
button, SFC MODE button, and DOLBY 3CH LOGIC
button.
The SFC MODE changes in sequence each time the SFC
MODE button is pressed. (The SFC indicator lights.)
STUDIO ——> SIMULATED SURROUND 7
off +—— ARENA
SURROUND EFFECT AND DOLBY 3CH LOGIC
2. Adjust levels to achieve a correct surround sound
reproduction.
This is done using GUI (page 24). For details concerning
how to perform level adjustment, refer to page 28.
19
<ARB7022>