Rodgers 940 Manual page 59

Hide thumbs Also See for 940:

Table of Contents

RESTORING THE FACTORY SETTINGS

To restore the factory combination settings for a single memory:

1. Press and HOLD the memory select piston (Ml, M2, M3 or M4) for

approximately five seconds. The display will show "LOCKED" or "UNLOCKED."

2. While HOLDING the memory piston, press and HOLD the SET piston for an additional

five seconds. The display will read "MEMORY n FACfORY DEFAULT."

3. Release both pistons. (Note: Each memory must be individually restored by following the

above procedure.)

To restore the factory Crescendo and Orchestral Crescendo settings:

1. Press and HOLD the ORCH CRESC piston for approximately five seconds. The display

will read "CRESCENDOS LOCKED" or "CRESCENDOS UNLOCKED."

2. While HOLDING the ORCH CRESC piston, press and HOLD the SET piston for an

additional five seconds. The display will read "CRESCENDOS FACfORY DEFAULT."

3. Release both pistons.

To restore the factory settings to the Tutti:

1. Press and HOLD the TUTII piston for approximately five seconds. The display

will show "TUTII LOCKED" or "TUITI UNLOCKED."

2. While HOLDING the TUITI piston, press and HOLD the SET piston for an additional

five seconds. The display will show "TUITI FACTORY DEFAULT."

3. Release both pistons.

Table of Contents