Table of Contents
Advertisement
.
. .
..
!
\.
.
....
MIDI DEVICE
In
This menu allows the organist to select the MIDI Device identification number used in System
Exclusive Stop Control messages. Nonnally, the organ both sends and recognizes an ID number of
17; Stop Control messages with other ID numbers will be ignored. This ID number may be changed
to allow independent control over multiple organ consoles connected via MIDI, or to facilitate
storing multiple sets of registration information on a sequencer recording. The number may
be set to
17 through 32, or 1. Setting the ID to 1 produces Stop Control messages which are compatible with
previous Rodgers PDI and C-series organs. The ID always returns to 17 when the organ is turned
off.
To set the MIDI Device ID:
1. Hold SET and turn the SELECf knob to locate the MIDI DEVICE ill menu.
2. Release SET and continue turning the SELECf knob to set the desired ID.
23
Advertisement
Table of Contents
