Rodgers 940 Manual page 31

Hide thumbs Also See for 940:
Table of Contents

Advertisement

,
.
"
Whenever a memory select piston is pressed, a message will appear on the console display
showing whether the internal memory or the Personal Memory Card memory is being used for the
selected memory level.
If an internal memory is accidentally copied to the Personal Memory Card, or if a memory level
is to be deleted on the Personal Memory Card so the internal memory can
be
used instead, delete the
memory level from the Personal Memory
C~d
by holding the General Cancel piston and pressing
the memory select piston for the memory level to be deleted. A message will appear on the console
display confmning the memory level has been deleted from the Personal Memory Card.
Immediately after this operation, the internal memory will be "reconnected."
STORING CRESCENDO SEQUENCES AND TUTTIS ON THE
PERSONAL MEMORY CARD
In addition to the combination memory levels, the Personal Memory Card can also store copies
of the Crescendo sequence(s) and Tutti(s). If a Crescendo set operation is perfonned while the card
is inserted, the new Crescendo sequence will be stored on the card rather than in the internal
Crescendo memory. If a Tutti set operation is perfonned while the card is inserted, the new Tutti
contents will likewise be stored on the card. Like the combination memory levels, these will
automatically replace the internal Crescendo(s) or Tutti(s) whenever the Personal Memory Card is
inserted in the slot.
To delete a Crescendo sequence from a Personal Memory Card, press the Orchestral Crescendo
piston to select the sequence to be removed (Orchestral Crescendo piston light off for Standard
sequence, or on for Orchestral Crescendo sequence). Hold the General Cancel piston and press the
Orchestral Crescendo piston. A message will appear on the console display confirming deletion of
the stored sequence from the Personal Memory Card.
To delete Tutti from the Personal Memory Card, hold General Cancel, and press the Tutti piston.
A message will appear on the console display to indicate the Tutti has been deleted from the card.
STORING OTHER SETTINGS ON THE
PERSONAL MEMORY CARD
Several other settings may also be stored on a Personal Memory Card. Changing any of these
settings causes all of them to be moved to the card, if they were not previously stored on the card.
The settings will automatically take effect when the card is inserted. The settings are:
*
Melody Note Range
*
Festival Trumpet Voice Selection
*
Bass Note Range
*
Tremulant Adjustments
*
Wind Stabilizer Status
*
Internal Reverb Status
*
MIDI Default Transmitted Velocity
To delete these settings from the card, hold General Cancel and press the BASS piston
momentarily. A message will appear on the Console Display indicating the settings have been
deleted from the card.
25

Advertisement

Table of Contents
loading

Table of Contents