Table of Contents
Advertisement
SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRIC SHOCK OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using this instrument, always follow basic precautions, including the following:
1.
Read all the instructions before using, adjusting or
10. Unplug the power cord of the instrument from the
repairing this instrument.
power source when left unattended for a long
period of time.
2.
To reduce the risk of injury, supervise children
closely when they are around the instrument.
11. Do not walk on or place objects on top of the
power cord.
3.
Use this instrument only in the manner
recommended by Rodgers Instrument
12. Do not pull the cord to unplug. Hold the plug
Corporation.
when unplugging from the power source.
4.
Do not use this instrument near water, for
13. When setting up with other instruments or
example, near a swimming pool or a damplWet
peripherals, follow the procedures in accordance
room.
with Rodgers' instructional manual.
5.
Use of this instrument, either alone or in
14. Take care that objects do not fall or liquids spill
combination with an amplifier and headphones or
into the instrument.
speakers,
may
be capable of prodUcing sound
levels that could cause permanent hearing loss.
15. Service the instrument with qualified service
DO NOT operate for a long period of time at a
personnel when:
high volume level or at a level that is
uncomfortable. If
you
experience
any
hearing
a.
The power cord or plug has been damaged.
loss or ringing in the ears,
you
should consult an
aUdiologist.
b.
Objects have fallen or liquid has spilled into
the instrument.
6.
Locate the instrument so its position does not
interfere with its proper ventilation.
c.
The instrument has been exposed to rain or
other weather damage.
7.
Locate the instrument
away
from heat sources
such as radiators, heat registers or other products
d.
The instrument does not appear to operate
that radiate heat directly onto the instrument.
normally or exhibits a marked change in
performance.
8.
Protect the instrument from dust as much as
possible.
e.
The instrument has been dropped or the
enclosure has been damaged.
9.
Connect the instrument to a power source only of
the type described in the operating instructions or
16. Do not attempt to service the instrument beyond
as marked on the instrument. Do NOT attempt to
that described in the user maintenance or
defeat the grounding connection of the three-
technical service manuals. Refer all other
prong attachment plug. This is a safety feature. If
servicing to qualified technical service personnel.
you
are unable to insert the plug into the outlet,
contact an electrician to replace
your
obsolete
outlet. Do NOT defeat the safety purpose of the
plug.
WARNING: THIS INSTRUMENT MUST BE EARTH GROUNDED.
You must GROUND instruments equipped with a TYPE AC, 3 WIRE GROUND PLUG.
SAVE THESE INSTRUCTIONS
i
Advertisement
Table of Contents
