Table of Contents
Advertisement
pulling in the cluton lever while the
circuit — main switch —
starting circuit
transmission is in a position other than
cut off relay — clutch lever switch is
neutral:
closed and the relay is actuated
Neutral switch
OFF
The subsequent operation is the same
Cluteh lever switch
ON
aso)
Since the clutch lever switch 1s on while
1 ewaledcatetght
6 Stator sete
2 Man swten
2. Searong arcu" cur fray
2. "START bomen
Butoh inves sunien
© Gxcory
8 Cede
.
Starter Motor Removal
1. Disconnect the wires from the attery
Remove the negative wire first
2. Remove tie left crankcase cover
3. Disconnect the wires from the starter
motor
4. Remove the starter motor by loosening
two securing bolts
5. Place an ail pan under tne engine. and
drain the engine 01!
6. Hemove the right rankcase cover,
Advertisement
Table of Contents
