Table of Contents
Advertisement
9. Set the crankcase right half ontn the
shefts and zap lightly on the case with a
soft head hianmner to assemble.
NOTE
De not tap on machined eurface cr end of
crankshaft
10. Install il crankcase bolts and tighten
in stages, using
a crisscross pattern.
11. After reassembly, apply a liberal coating
of 4-struke engine oil to the crank pin
and bearing,
12. Check
crankshaft
and
transmission
shafts for proper operaticn and freedom
of movement.
4, Install the shift cam,
5. Install the shift fork 1 and 2
6. Chock to see that all parts move frocly
prior to installing right case half.
Check for correct transmissicn onare-
tion and mske certain that all loose
Shifter
shims are
2 During installation
noto the indox
mark on the shift lever 2 and center of
shift lever 1. Align.
NOTE
il each gear and bearing
thoroughly.
7. Install tho balanoe we gh
8, Apply Yamahe
Bond No. 4 te the mat
ing surfaces af both case halve:
Apply thoroughly.
over all
faces.
ng sur-
+ Shite
2 Soiktark
2. Daleres wane
2 sntleert
¢ Shktiow 7
1) Vemane Bond Mo. 3
321
Advertisement
Table of Contents
