Vci Connector - Launch Creader Professional 919 MAX Manual

LAUNCH
4. POWER Key
• In Off mode, press it for 3 seconds to turn the tablet on.
• In On mode:
• Press it once to activate the LCD if the LCD is off. Press it once to turn off
the LCD if the LCD lights up.
• Press and hold it for 3 seconds to turn it off.
• Press and hold it for 8 seconds to perform forced shutdown.
5. LCD Screen
Indicate the test result.
6. Speakers
7. Rear Camera
8. Microphone

1.3.2 VCI Connector

The VCI connector works as a vehicle communication interface device, which is
used to connect to the vehicle's DLC (Data Link Connector) socket via the
diagnostic cable to read the vehicle data and then send it to the tablet.
5