Launch X-431 PRO User Manual
  1. Manuals
  2. Brands
  3. Launch Manuals
  4. Tablet
  5. X-431 PRO MINI
  6. User manual

Launch X-431 PRO User Manual

Hide thumbs Also See for X-431 PRO:
Table of Contents

Advertisement

Quick Links

See also: Manual

Advertisement

Table of Contents
loading

Related Manuals for Launch X-431 PRO

Summary of Contents for Launch X-431 PRO

  • Page 2 Version: V1.00.001 Revised date: 2013-08-12...

  • Page 3: Copyright Information

    LAUNCH is not responsible for any use of this information as applied to other units. Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or...

  • Page 4: Safety Precautions

    Keep X-431 PRO far away from magnetic devices because its radiations may erase the data stored on the devices. Store X-431 PRO out of reach of children and do not allow children to use it unsupervised. Please use the included battery and charger. Otherwise, explosion may happen.
  • Page 5 LAUNCH X-431 PRO User’s Manual — Safety Precautions messaging, because it may cause a data communication interruption. If it happens, it is abnormal and just try to re-do it. Precautions on Operating Vehicle’s ECU Do not disconnect the vehicle inner consumer when the ignition switch is on.

  • Page 6: Table Of Contents

    LAUNCH X-431 PRO User’s Manual — Table of Contents Table of Contents 1 INTRODUCTIONS.................... 1 ................... 1 RODUCT ROFILE ....................1 EATURES X-431 PRO ..............2 NOWLEDGE OF 1.3.1 X-431 PRO Whole Set............... 2 1.3.2 X-431 PRO Tablet Computer............. 3 1.3.3 X-431 PRO Protection Sleeve............
  • Page 7 LAUNCH X-431 PRO User’s Manual — Table of Contents 3.4.1 User registration ................14 3.4.2 Software layout ................16 3.5 D ............17 OWNLOAD IAGNOSTIC OFTWARE 3.6 S ................... 17 TART IAGNOSING 3.5.1 Read Trouble Code................20 3.5.2 Clear Trouble Code................20 3.5.3 Read Data Stream ................
  • Page 8 ..................37 SING LUETOOTH 4.4.1 Open Bluetooth................37 4.4.2 Allow other devices to search for X-431 PRO ......... 37 4.4.3 Search other devices and pair X-431 PRO with it......37 4.4.4 Send file via Bluetooth..............37 4.5 C ....................38 AMERA 4.5.1 Open and close camera ..............

  • Page 9: Introductions

    X-431 PRO User’s Manual — Knowledge of X-431 PRO 1 Introductions 1.1 Product Profile X-431 PRO is a new vehicle trouble diagnostic device developed based on internet and mobile terminals by Launch with over 20 years R&D experience in vehicle diagnosis. Through the Bluetooth communication between vehicle...

  • Page 10: Knowledge Of X-431 Pro

    1.3 Knowledge of X-431 PRO 1.3.1 X-431 PRO Whole Set X-431 PRO is composed of an X-431 PRO tablet computer, a protection sleeve and a DBScar diagnostic connector. Fig. 1-1 X-431 PRO whole set A ---- X-431 PRO tablet computer (See Chapter“1.3.2”) B ---- Protection sleeve (See Chapter “1.3.3”)

  • Page 11: X-431 Pro Tablet Computer

    LAUNCH X-431 PRO User’s Manual — Knowledge of X-431 PRO 1.3.2 X-431 PRO Tablet Computer Fig. 1-2 X-431 PRO tablet computer Name Notes POWER key In Off mode, press it to turn on X-431 PRO; In On mode, press it to activate the LCD if the LCD is blank.

  • Page 12: X-431 Pro Protection Sleeve

    To remove protection sleeve from X-431 PRO main unit, follow the steps described as below to proceed: 1. Pull the red sleeve outwards from the right margin of X-431 PRO, and then remove it completely. 2. Reverse the upper enclosure and then use the screwdriver to loosen all screws.

  • Page 13: Golo Diagnostic Connector (Applied For Personal Car Owners)

    LAUNCH X-431 PRO User’s Manual — Knowledge of X-431 PRO ③ Communication It will flash once the DBScar indicator connector is communicating with X-431 PRO or it is being reset. ④ Micro USB port To connect to PC for data transmission or upgrade via USB cable.

  • Page 14: Package List

    Working humidity: <60% Net weight: about 26g 1.5 Package List While purchasing, please check the following accessories: • X-431 PRO tablet computer (including X-431 PRO protection sleeve) • Password envelope • DBScar diagnostic connector • OBD II extension cable • Cigarette lighter cable •...

  • Page 15: Preparations

    The charging time of battery varies with temperature condition and battery consumption status. While X-431 PRO has low battery, a beep will sound. If it is very low, X-431 PRO will be switched off automatically. Note: Do one of the followings to save power: When X-431 PRO keeps unattended, press POWER key to turn off the LCD.

  • Page 16: Power On / Power Off X-431 Pro

    2.3 Power on / power off X-431 PRO 2.3.1 Power on 1. Press the POWER key to turn on X-431 PRO. 2. If it is the first time you turned on X-431 PRO, the system will prompt you to make some initial setup. 3. Set your account.

  • Page 17: Customize Your Desktop

    LAUNCH X-431 PRO User’s Manual — Knowledge of X-431 PRO Connected to Wi-Fi Airplane mode Bluetooth is on Alarm has been set. Connected to other View more notices Bluetooth device Battery fully Mute your X-431 charged Charging Low battery New mail Full memory 2.5 Customize your desktop...

  • Page 18: Create A Folder On The Desktop

    2.8 Lock & unlock the screen 2.8.1 Lock the screen • When X-431 PRO is ON, press POWER key once to lock the screen; • The system will lock the screen automatically after X-431 PRO remains idle for a long time.

  • Page 19: Unlock The Screen

    According to the regulations of some countries or areas, PC device must be turned off before boarding on the airplane. The way to disable functions of X-431 PRO is to set it as airplane mode. In this mode, all wireless radio waves will be disabled, including mobile network, Bluetooth and WLAN.

  • Page 20: How To Diagnose

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis 3 How to diagnose 3.1 Connect DBScar connector Follow the steps mentioned below to connect DBScar connector: Locate vehicle’s DLC socket. The DLC (Data Link Connector or Diagnostic Link Connector) is the standardized 16-cavity connector where diagnostic code readers interface with the vehicle's on-board computer.

  • Page 21: Bluetooth Setting

    3.2 Bluetooth setting Enter X-431 PRO Bluetooth setting screen (“Settings” --> “Wi-Fi” --> “Bluetooth”), slide the Bluetooth switch to ON and X-431 PRO will start searching available Bluetooth device, click the desired connector to pair and match. By default, the Bluetooth name is 98269*****00 (where ***** stands for 5 digits.).

  • Page 22: User And Connector Registration

    3.4 User and connector registration 3.4.1 User registration Click the icon on the desktop to launch the application, a disclaimer page will pop up on the window. Click “I’ve read it” to enter the login interface of diagnosis software, as indicated in Fig. 3-3.
  • Page 23 LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Fig. 3-5 In Fig. 3-5, tap “Register Connector” if you want to experience vehicle diagnostic software. See Fig. 3-6. Fig. 3-6 Input the Serial Number and Verification Code, and then tap “Confirm”.

  • Page 24: Software Layout

    My Data: to view diagnostic report and operation log. What’s New: to view the Launch’s latest information and product trends. Customer Management: to manage customer’s information, including add new customer and remote diagnosis etc.

  • Page 25: Download Diagnostic Software

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis More: To view software version and user’s manual. While accessing other menus, tap shown on the bottom of the screen to extend the display window. While browsing information, tap to zoom in or zoom out.
  • Page 26 LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Connected” but “Paired” will appear on the screen. See Fig. 3-10. Fig. 3-10 Tap the desired connector to start connecting. If successful, a pop-up message “Connected to 98269*****00” will be shown. After Bluetooth is properly connected, the system will enter software version selection screen.
  • Page 27 LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis screen will display as below: Fig. 3-12 Tap “Demo” to enter system selection interface. See Fig. 3-13. to return to the function selection screen. Fig. 3-13 Tap “Engine”, the system will jump to the function menu. See Fig. 3-14.

  • Page 28: Read Trouble Code

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Fig. 3-14 To return to the previous screen, tap 3.5.1 Read Trouble Code Tap “Read Trouble Code” in function menu, the screen will display the diagnostic result. Generate Current Text Reports: to save the current data in text format.
  • Page 29 LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Fig. 3-15 Check the box before the desired item and then tap “Confirm”. To select all, tap “Select all”. To deselect all, tap it again. To return to the previous screen, tap After communication is complete, dynamic data of the selected datastream will appear on the screen.
  • Page 30 LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Fig. 3-16 Tap one item, the system will display data changes in waveform. To stop reading, . Tap to resume. On datastream reading page, the following operations can be done: On-screen buttons descriptions: Data Stream: Tap to select the desired datastream to be browsed, and then tap “Confirm”...

  • Page 31: Special Function

    This function provides a mass of service information for various vehicle models, which enables users to retrieve service data of some vehicle online. Note: To access service information successfully, please make sure X-431 PRO is properly connected to internet. Tap “Maintenance Database” to enter. Tap on the bottom of the screen to unfold the browse window.

  • Page 32: M Ydata

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Fig. 3-17 Select one option to enter. Here we take “Repair Case” as an example. Tap “Repair Case” to enter vehicle selection interface, choose the desired one to enter. To return to the previous screen, scroll the screen to the left until the hidden contents are displayed on the screen, and then tap Tap “Check”...
  • Page 33 LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis diagnosis. Additionally, delete, send operations are also supported. Tap “Diagnostic Report”, a list of diagnostic report will appear below the tab. Tap the desired one to view its content. Fig. 3-18 Diagnosis playback will appear on the screen if you chose to record while reading data stream.
  • Page 34 LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Fig. 3-19 Button definitions: : To revise the diagnosis report filename; : To delete the selected report; : To send the report via Bluetooth, email or messaging. In Diagnosis playback, tap certain file to view it. See Fig. 3-20.

  • Page 35: Operation Record

    DBScar connector serial number, operation time and check vehicle brand etc. 3.8 What’s New This option allows you to view the latest information and news from Launch. Tap “What’s New”, the system will display the relevant information title. Tap the...

  • Page 36: Customer Management

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis 3.9 Customer Management This function enables you manage your customer information. Tap “Customer Management” to enter Fig. 3-21: Fig. 3-21 Add Customer: to create customer’s data. Customer’s Info.: to view and modify the customer’s information (Where Serial No.

  • Page 37: Circle

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Fig. 3-22 Check the box next to the software that you intend to download (To select all, just tap “Select All”), then tap the “Next Step” to enter download page. Tap “Download” to start downloading.

  • Page 38: User Management

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis Circle: To view and create a circle. Circle allows you to look for a rider circle with common interest for technical exchange and experience sharing. Tap a circle to view all history messages; tap to view its detailed information.

  • Page 39: Theme

    LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis If you have not set the security question ever, a message box prompting you of you haven’t set the security question will appear. In this case, tap “Mailbox Retrieve”, the system will send the password to your email.

  • Page 40: Others

    LAUNCH X-431 PRO User’s Manual — Others 4 Others 4.1 Email The function allows you to send and receive email. You can add POP3 or IMAP email account for some common web email service provider. 4.1.1 Add an email account Note: Before sending or receiving email, you have to set up an email account.

  • Page 41: View Email

    LAUNCH X-431 PRO User’s Manual — Others 5. Input a title in Subject column. 6. Enter the content in Compose email area. 7. After inputting, tap , you can perform any one of the followings: attach file, add CC/BCC, save draft, discard and setting.

  • Page 42: Wlan

    4.2.2 Connect to Wi-Fi Enter main menu screen, choose “Settings” > “Wi-Fi”. , and then choose “Scan” from the pop-up option menu. X-431 PRO will start scanning all available Wi-Fi networks. Tap the desired one to connect. If the network you chose is open, you can connect to it directly;...

  • Page 43: Browser

    4.3 Browser 4.3.1 Open browser Enter main menu screen, tap to launch the browser. You can choose the desired homepage or input the website address to browse. 1 Tap to input or edit the web link 2 Web page display area 3 Tap to open bookmarks, view history and saved web pages 4.3.2 Browse a webpage...

  • Page 44: Zoom In / Zoom Out A Page

    LAUNCH X-431 PRO User’s Manual — Others other hidden content. 4.3.3 Zoom in / zoom out a page There are two ways to zoom in/ zoom out while browsing a webpage. • To zoom in so that the text on a webpage appears in a column that fits your device’s screen, double-tap with the tip of your finger.

  • Page 45: Using Bluetooth

    Enter main menu screen, tap “Settings” > “Bluetooth”. X-431 PRO starts scanning all Bluetooth devices. Choose the desired one from the search result to pair it with X-431 PRO. 4.4.4 Send file via Bluetooth You can send pictures, video, audio files or test reports to others for sharing and review via Bluetooth.

  • Page 46: Camera

    LAUNCH X-431 PRO User’s Manual — Others audio file. and choose “Bluetooth” from the pull-down menu. Tap the target Bluetooth device you want to transmit files. 4.5 Camera 4.5.1 Open and close camera Enter main menu screen, tap In shoot mode, tap to exit the camera.

  • Page 47: View A Video

    LAUNCH X-431 PRO User’s Manual — Others 4.5.5 View a video After a video is recorded, it will be displayed in thumbnail at the lower right corner of the screen. Tap it to view in full-screen mode. The following operations can be done: •...

  • Page 48: Gallery

    This option is used to manage pictures and video files. 4.6.1 Open gallery Enter main menu screen, tap “Gallery” to access it. The system searches images and videos in X-431 PRO and SD card automatically, and categorizes it into corresponding folders. 4.6.2 Browse images Enter main menu screen, tap “Gallery”.

  • Page 49: Music Player Interface

    LAUNCH X-431 PRO User’s Manual — Others Open music file list. Tap the desired audio files to start playing. Press VOLUME+/- key to increase or decrease the volume. Tips: While playing, tap to switch to other applications and the player will be running in background.

  • Page 50: Create A New Playlist

    LAUNCH X-431 PRO User’s Manual — Others , the following settings can be made: party shuffle, add to playlist, use as ringtone, delete, sound effect and search etc. to return to the previous screen. to go back to desktop. 4.7.3 Create a new playlist 1.

  • Page 51: Delete An Alarm

    LAUNCH X-431 PRO User’s Manual — Others Set the detailed items. After setting, tap “DONE” to confirm. 4.9.2 Delete an alarm Enter main menu screen, tap “Alarms”. Tap the desired alarm. , then tap “OK” in the confirmation dialog box to delete it.

  • Page 52: Auto-Rotate The Screen

    4.12 Set screen lock This item allows you to protect your X-431 PRO from unauthorized use by creating a personal screen unlock pattern. Once it is set, X-431 PRO screen will not be unlocked until you draw the right pattern.

  • Page 53: View The Running Applications

    4.15 Set date & time X-431 PRO is preset to use the network-provided date, time zone and time. Note: If Automatic date & time is set as Use network-provided time, date, time and time zone will not be defined.

  • Page 54: View And Release The Memory Of Sd Card And X-431 Pro

    “Settings” > SD card and X-431 PRO memory. Release X-431 PRO memory In case your X-431 PRO encounters low memory, please try to solve it by doing the following: • Move the file and email attachments to SD card.
  • Page 55 The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.
  • Page 56 Launch website: http://www. cnlaunch.com http://www.x431.com Statement: LAUNCH reserves the rights to make any change to product designs and specifications without notice. The actual object may differ a little from the descriptions in the manual in physical appearance, color and configuration. We...

Table of Contents