LAUNCH
1.3 Components & Controls
There are two main components to the diagnostic system:
Display Tablet – the central processor and monitor for the system (See
Chapter 1.3.1).
VCI Device – the device for accessing vehicle data (See Chapter 1.3.2).
1.3.1 Display Tablet
The tablet acts as the central processing system, which is used to receive and
analyze the live vehicle data from the VCI device and then output the test result.
1. Microphone
2. Type-A USB Port
• Connect to the VCI connector to perform vehicle diagnosis via the USB cable.
• Connect to an external USB storage device for data exchange.
3. Type-C USB Port
•
Connect to AC outlet for charging.
•
Connect to PC for data exchange.
4
Need help?
Do you have a question about the Creader Professional 919 MAX and is the answer not in the manual?
Questions and answers