Table of Contents
Advertisement
Available languages
Available languages
No Item
Description
MIC: Audio In
4
Audio line input, 2-pole terminal
G: GND
SPK: Audio Out
Audio line output, 2-pin connector
5
Connect the loudspeaker to the audio line output and the external microphone to the audio
G: GND
input�
Camera overview
The camera is equipped with a u-SD memory slot for recording videos and a button for
resetting the camera to factory settings�
No Item
Description
Follow the instructions below to reset the network camera to the factory default settings
using the reset button�
1� Switch off the network camera by unplugging the power adapter�
1
Reset Button
2� Press and hold the reset button with a bent paper clip while switching the camera back on�
3� Press and hold the reset button for about 5 or more seconds� Release the reset button�
4� The network camera resets to the factory settings and restarts after the factory reset is
complete�
2
SD card slot
Micro SD memory slot on the bottom of the card� Insert the SD memory card�
CAUTION:
When performing a Factory Reset, you will lose any settings that havebeen saved�
(Default IP: 192�168�30�220)
EN
11
Advertisement
Chapters
Table of Contents
