JMK CLOCKstep:MULTI Manual page 7

CLOCKstep:MULTI
Transport and Clock (con nued)
Resync Transport Mode
Similar to Simple Transport Mode, but in this mode Pause is replaced by a
Resync func on.
While started, this bu on is used to Resync the Metronome Bar and all
connected devices (by sending Stop, Reset, Song Posi on Pointer=0 and
Start in that order).
Star ng or Stopping the Clock cannot be performed independent of the
Transport commands in Resync Transport Mode.
Align Transport Mode
A hybrid of the previous 2 modes, this mode offers more func onality from
using only 2 bu ons.
If the clock is currently running, this bu on sends the Resync command set
while simultaneously aligning the Metronome Bar to this point.
While started, this bu on is used to Pause the Clock and send a Stop
command to all connected devices.
While paused, this bu on is used to resume the Clock and send
Start/Con nue commands to all connected devices.
While stopped, this bu on can be used to begin running CS:M's internal
Clock independently of Transport commands, which also begins running the
Metronome. Only the Clock pulses are sent to other devices, there are no
other commands transmi ed.
con nued ...
Copyright 2023 JMK Music Pedals
The Start/Pause bu on is used to simultaneously begin
running the Clock and sending Start commands to all
connected devices.
The Clock/Stop bu on is used to Stop the unit if it is currently
started.
If the Clock is not currently running, the Start/Pause bu on is
used to simultaneously run the Clock and send Commands to
all connected devices.
While started, the Clock/Stop bu on is used to send Stop
commands to all connected devices. This does not stop CS:M's
own Clock and Metronome un l you press it a second me.
version 1.0 (build 0050) JMK MUSIC PEDALS
7