JMK CLOCKstep:MULTI Manual page 24

CLOCKstep:MULTI
MIDI IN Specifica on (con nued)
Parameter
Trigger Time
MIDI DIN Thru Enabled
MIDI USB Thru Enabled 61
System Real- me Start
CLOCKStep:MULTI will respond to a Real- me Start command by star ng the
Transport. (see MIDI Con nuous Controller #18 for an alternate way to start
the Transport via MIDI).
System Real- me Con nue
CLOCKStep:MULTI will respond to Real- me Con nue commands by star ng the
Transport and resuming count at the same place where it was previously
stopped. (see MIDI Con nuous Controller #19 for an alternate way to Con nue
the the Transport via MIDI).
System Real- me Song Posi on Pointer
The only value CLOCKstep:MULTI will respond to is Zero (0). CLOCKStep will
immediately reset the count of the Click Audio back to the beginning.
System Real- me Stop
CLOCKstep:MULTI will respond by stopping the Transport. (See Con nuous
Controller #18 for an alternate way to stop the Transport via MIDI).
System Real- me Clock
Automa cally detected. If clock is not already running, then CLOCKstep:MULTI
begins following the external MIDI Clock.
Copyright 2023 JMK Music Pedals
version 1.0 (build 0050)
CC# Range
52 1-16
60 0, 64, 127
0, 64, 127
JMK MUSIC PEDALS
Notes
Length of CV signals in
milliseconds (default 8)
0=No, 64=Toggle, 127=Yes
0=No, 64=Toggle, 127=Yes
24